Karfe Butt Welding Bututu Fittings Cap
Cap
Abu: Carbon Karfe, Bakin Karfe, Alloy Karfe
Na fasaha: ƙirƙira da turawa
Haɗin kai: walda
Standard: ANSI,ASME,AP15L,DIN,JIS,BS,GB
Nau'in: 45° da 90°LR/SR Hannun hannu, Masu Ragewa, Tee, Lanƙwasa, Cap, Giciye.
Kaurin bango: SCH5-SCH160 XS XXS STD
Fasa: Baƙar Fenti/Mai Tsatsa Mai Tsatsa/Tsama Galvanized
Kwangila: 30/45/60/90/180°
Girman: 1/2"-80"/DN15-DN2000
Takaddun shaida: ISO -9001:2000, API, CCS
Aikace-aikace: Masana'antar Sinadari, Masana'antar Man Fetur, Masana'antar Ginawa da Sauransu
Dubawa: Factory In-House Check ko Na uku dubawa
Shiryawa: Plywood Pallets / Cakulan Katako Ko Dangane da Bayanin ku
ASME B16.9, B16.28
| Girman Bututu | Duk Kayan Aiki | 90 & 45 Gishiri da Tees | Masu Ragewa da Ƙunƙarar Haɗin gwiwa ta Lap | iyalai | |||||||
|
| Waje Diamita a Bevel, D (1) | Diamita na Ciki a Ƙarshe (1) | Kaurin bango t | Matsakaici-zuwa-Ƙarshe A,B,C,M | Tsawon Gabaɗaya, F,H |
| |||||
|
|
|
|
|
|
| Tsawon Gabaɗaya, E | |||||
|
|
|
|
|
|
|
| |||||
|
| IN | MM | IN | MM |
| IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0.06 | +1.6 | ± 0.03 | ± 0.8 | Ba Kasa da 87.5% na Kauri mara kyau ba | ± 0.06 | ±2 | ± 0.06 | ±2 | ± 0.12 | ±3 |
|
| -0.03 | -0.8 |
|
|
|
|
|
|
|
|
|
| 3 ~ 2½ | ± 0.06 | ± 1.6 | ± 0.06 | ± 1.6 |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
| 5 ~ 8 | +0.09 | +2.4 |
|
|
|
|
|
|
| ± 0.25 | ± 6 |
|
| -0.06 | -1.6 |
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0.16 | +4.0 | ± 0.12 | ± 3.2 |
| ± 0.09 |
| ± 0.09 |
|
|
|
|
| -0.12 | - 3.2 |
|
|
|
|
|
|
|
|
|
| 20 ~ 24 | + 0.25 - 0.19 | + 6.4 - 4.8 | ± 0.19 | ± 4.8 |
|
|
|
|
|
|
|
| 26 ~ 30 |
|
|
|
|
| ± 0.12 | ±3 | ± 0.19 | ±5 | ± 0.38 | ± 10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 32 ~ 48 |
|
|
|
|
| ± 0.19 | ±5 |
|
|
| |
| Girman Bututu | Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙaƙwalwa (2) | Lanƙwasawa 180 Komawa | ||||||||||
|
| Wajen Diamita na Lap, G | Kaurin cinya | Fillet Radius da Lap, R | Girman Cibiyar-zuwa-Cibiyar, O | Komawa- Face Dimension, K | Daidaitawar Ƙarshen, U | ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0-0.03 | +0-1 | +0.06-0 | + 1.6-0 | +0-0.03 | +0-1 | ± 0.25 | ± 6 | ± 0.25 | ± 6 | ± 0.03 | ±1 |
| 3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
|
|
|
| +0-0.06 | +0-2 |
|
|
|
|
|
|
| 5 ~ 8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0-0.06 | +0-2 | +0.12-0 | + 3.2-0 |
|
| ± 0.38 | ± 10 |
|
| ± 0.06 | ±2 |
| 20 ~ 24 |
|
|
|
|
|
|
|
|
|
|
| |
| Girman Bututu | Kashe Angle, Q | Kashe Jirgin sama, P | ||
|
| IN | MM | IN | MM |
| ½ ~ 4 | ± 0.03 | ± 1 | ± 0.06 | ± 2 |
| 5 ~ 8 | ± 0.06 | ± 2 | ± 0.12 | ± 4 |
| 10 ~ 12 | ± 0.09 | ± 0.19 | ± 5 | |
| 14 ~ 16 | ± 3 | ± 0.25 | ± 6 | |
| 18 ~ 24 | ± 0.12 | ± 4 | ± 0.38 | ± 10 |
| 26 ~ 30 | ± 0.19 | ± 5 | ||
| 32 ~ 42 | ± 0.50 | ± 13 | ||
| 44 ~ 48 | ± 0.75 | ± 19 | ||
LABARI:
Bayan-zagaye shine jimillar cikakkiyar ƙima na ƙari da rage juriya.
Diamita na wajen ganga duba tebur a shafi na 15.
Rarraba Karfe Carbon
(1) Dangane da manufar, carbon karfe za a iya raba carbon tsarin karfe, carbon kayan aiki karfe da free yankan tsarin karfe.Carbon tsarin karfe za a iya raba aikin injiniya yi karfe da inji masana'anta tsarin karfe;
(2) Dangane da hanyar narkewa, ana iya raba shi zuwa buɗaɗɗen ƙarfe na murhu da ƙarfe mai canzawa;
(3) Bisa ga hanyar deoxidation, ana iya raba shi zuwa karfe mai tafasa (f), karfen da aka kashe (z), karfe da aka kashe (b) da karfe na musamman (TZ);
(4) Bisa ga abun ciki na carbon, carbon karfe za a iya raba zuwa low carbon karfe (WC ≤ 0.25%) da matsakaici carbon karfe (WCO. 25% - 0.6%).
Kuma high carbon karfe (WC> o.6%)
(5) Bisa ga ingancin karfe, carbon karfe za a iya raba zuwa talakawa carbon karfe (high phosphorus da sulfur), high quality-carbon karfe (ƙananan phosphorus da sulfur), high-sa high quality-karfe (ƙananan phosphorus da sulfur). ) da kuma ƙarfe na musamman mai inganci
